Heat / Water Loss Calculator Container / Pit Dimensions RectangularCircular Length (m)feet Width (m)feet Diameter (m)feet Area (m2)ft2 Water Depth (m)inches Container Volume (m3)barrels Volume per cm (m3/cm)barrels/inch Temperature Ambient Air Temp (Celsius)Fahrenheit Heat water from (Celsius)Fahrenheit Heat water to (Celsius)Fahrenheit BTU to Heat Water with NO LOSSES (btu) Conductive losses through top only (btu/hour) To calculate evaporation losses Average Daily Wind Speed (km/h)MPH Humidity Ratio at water temp (Celsius)0510152025303540Fahrenheit Ratio Specific Humidity (from Mollier Diagram) Evaporated water losses (kg/sec)kg/hr Energy lost / 1st hour due to Evaporation at desired temp. (KW)BTU Energy lost / 1st hour due to Conduction at desired temp. (KW)BTU Total Energy losses (KW)BTU/hour Temperature losses / 1st hour if it was heated (Celsius)Fahrenheit Water cost (purchase, pumping/hauling, and heating) in $ per m3 $/gallon First hour evaporation losses (m3)gallons First hour losses in height (cm)inches First hour water losses replacement cost ($) Liqui-Cover Costs Liqui-Cover Application Rate (ml/m2) NOTE: Recommended application for Liqui-Cover DW is not less than 4 ml/m2 and for Liqui-Cover HD is 50 ml/m2 for 2-3 weeks protectionml/ft2 Liqui-Cover Volume (L) Product costs per m2 ($)$/ft2 Total Liqui-Cover Costs ($) Liqui-Cover Costs Recovered in hours (assuming a 90% evaporation reduction) . ×
